Full product tutorial
Follow a construction project from first drawing to final handover
Explore the current project summary, document control, progress, 360° reality capture, quality, HSE, commercial cost control, handover and administration workspaces using one fictional project. The tour is open — nothing to install and no sign-in needed.
Work inspection · attached to 40218-NBC-WIR-0157 · Level 4 slab
Structural — pre-pour reinforcement (work inspection)
M. Doshi — QA/QC Engineer, Northbay Construction
- 1.1Pass
Formwork line, level and props checked
- 1.2Pass
Bar diameter and spacing as per approved drawing R1
- 1.3Fail
Concrete cover blocks fixed at required centres
Cover reads 38 mm at grid C4-C5; specification requires 40 mm. Corrected before pour.
- 1.4Pass
Laps and anchorage lengths verified
- 1.5N/A
MEP sleeves and penetrations in position
No sleeves in this pour zone.
- 1.6Not answered
Area cleaned and free of debris before pour
Submission gate
1 line still unanswered — the inspection cannot be submitted until every line carries a pass, fail or N/A. Failed lines require a comment.
What the demo shows
The tutorial follows the same structure and terminology as the working product, from project setup and controlled records through site delivery, assurance and handover.
Project summary and team
A concise project position, action queue, organisation directory and module permissions for every team member.
Document control
Drawings, models, revisions, correspondence, redlines and formal decisions in connected registers.
Progress and site records
Approved programmes, resources, quantities, dated 360° floor-plan capture, comparisons and QR-verified reports.
Quality (QA/QC)
ITPs, WIR, MIR, NCR, SOR and snag close-out with mandatory checks, evidence and approvals.
Health and safety
Incidents, hazards, permits, corrective actions, safety audits and worker certification from one command centre.
Commercial and cost control
Cost plan baselines, contracts, variations, payment certificates and FIDIC notices and claims with delay impact.
Handover and close-out
Readiness, assets, O&M records, warranties, commissioning checklists and the final handover pack.
Who the tour is for
Project managers
See how each delivery function contributes to one accurate project position and action queue.
Consultants and clients
Follow programme, document, quality and handover reviews through defensible approval trails.
Contractors and site teams
See how programme, resources, quantities, inspections, safety records and photographs stay aligned.
QA/QC and HSE teams
Use checklists, permits, audits, corrective actions and approval gates without separate spreadsheets.
Planners and quantity surveyors
Check live programmes, deployment plans, approved logs, BOQ quantities and resource shortfalls.
Commercial and contracts teams
Follow cost plans, variations, payment certificates, notices and claims through their contractual approval routes.
After the tour
Start a 30-day trial for a new workspace, or accept a secure invitation to join an existing organisation and project.